BMW Swing Arm Sleeve Kit 7880 - High Quality CTA Tools Replacement Part for Smooth Ride & Enhanced Suspension Performance | Perfect for BMW Maintenance & Repair, DIY Projects, and Auto Restoration
$131.85 $175.81-25%
Free shipping on all orders over $50
7-15 days international
9 people viewing this product right now!
30-day free returns
Secure checkout
99453941
Guranteed safe checkout
DESCRIPTION
For the removal & installation of the front lower control arm bush(in) on BMW 3 Series. Can be used in situations without removing the arm from the vehicle. When installing the new bushes, they must be held compressed while being pressed into the suspension control arm which this tool is designed for. This tool is designed for keeping the bushes compressed while being pressed into the suspension control arm. Applications: BMW 330xi, E90, E91, E92 3 Series & all X Series.BMW 3 시리즈에서 전면 하부 컨트롤 암 부시(인치) 제거 및 설치. 차량에서 팔을 제거하지 않고 상황에서 사용할 수 있습니다. 새 부시를 설치할 때 이 도구가 설계된 서스펜션 컨트롤 암에 눌러서 압축된 상태로 유지해야 합니다. 이 도구는 서스펜션 컨트롤 암에 눌러서 덤불을 압축하도록 설계되었습니다. 용도: BMW 330xi, E90, E91, E92 3 시리즈 및 모든 X 시리즈.
FEATURES
For the removal & installation of the front lower control arm bush(in) on BMW 3 Series
Can be used in situations without removing the arm from the vehicle
When installing the new bushes, they must be held compressed while being pressed into the suspension control arm which this tool is designed for
This tool is designed for keeping the bushes compressed while being pressed into the suspension control arm
Applications BMW 330xi, E90, E91, E92 3 Series & all X Series
REVIEWS
****** - Verified Buyer
4.5
I used this kit to press out the rubber (M3) in-board bushings from the front control arms of my E92 335i, and to also install some Turner Motorsport spherical bearings in their place. The kit is more than competent and worked perfectly!!Some tips:1. Thoroughly clean up the area around the bushing to be pressed out. There should be little to no dust, debris, or corrosion that is visible. If the bushings are old and very corroded, hit it with some penetrating fluid to help get things moving.2. Grease the entire length of the threaded stud, and use a ratcheting wrench (19mm for this kit) to tighten the nut. Do not use impact tools unless you want to break the stud or mar the threads!3. Use a wire wheel brush on a drill to clean the inside of the control arm of any rust or burrs. If pressing in poly bushings, use some copper antiseize on all the articulating surfaces of the bushings and metal sleeves. If pressing in spherical or rubber bushings with a metal sleeve, use some green retaining compound.
